When building your own go kart. There is a list of essential go kart parts that you will need before you get started. Some of the go kart parts required for your project can be found easily via recycled lawnmowers or your local hardware store, other go car parts you need for your project will take a little more time to find.
The key go kart parts and components are:
The go kart engine.
The go kart frame.
The go kart steering.
The go kart suspension.
The go kart breaks.
The go kart wheels and tires.
The go kart seat and seat belts.
The centrifugal clutch.
The torque converter.
While you can salvage go car parts like the engine and sometimes wheels and tires from other things like lawnmowers, go car parts like the frame will either need to be ordered or built yourself which requires welding. Go kart that parts that you can not build yourself are things like the centrifugal clutch and the torque converter but they can easily be ordered online. Their other go kart parts that you can build but I would recommend not those are things like the seats, gas pedal and brake pedal; these items are fairly inexpensive to buy online and it’s much safer than building them yourself.
Here is some more detailed information go karts parts;
- Belts: probably some of the most needed go karts parts are belts and torque converter drive belts. When it comes to go karts parts the leader in torque converter drive belts is Manco. Belts typically run from $25-$50 depending on the model or type needed.
- Cables for throttle and brakes: Another highly replaced category of go karts parts are cables to control throttles and breaking. These items can be as simple as a cable stop and screw assembly for couple of dollars or throttle cable that can run around $15, once again Manco is a top company providing these go karts parts.
- Clutches – centrifugal: When it comes to clutches and clutch assemblies you are now talking about go karts parts that you don’t want to replace often because now we can be talking about some serious money. Clutch assemblies are categorized by tooth number and bore and can cost anywhere from $35 to over $100. TCS is one of the leading go karts parts manufacturers of clutch assemblies in many different tooth and bore combinations.
- Sprockets: sprockets are go karts parts that tend to wear out quite often depending on how hard of a driver you are in the conditions you are driving under their many different sprockets out there ranging from around $17 onwards up to $65 with great variance in hub bores and tooth design.
- Chains: a list of go karts parts would not be complete without chains, chains typically run from $14 to $40 some chains offer master links sold separately some have the master links included. Manco is one of the leading manufacturers of go karts parts chains.
- Spindles: spindles are sold as let’s spindles or write spindles and typically cost around $25 each. TCS is a great source for go karts parts spindles.
- Wheel assemblies: the most common go karts parts wheel assemblies come in the six-inch or 7 inch Friday they run anywhere from $65-$140 and include a tire.
- Torque converter drive and driven units: a driver assembly for go kart can typically cost $100. A driven pulley assembly around $95.
- Tires and tubes: tires and tubes are probably the most commonly replaced go karts parts. Tires run about $30-$75 each and tubes cost around $15-$25.
- Bearings: go karts parts bearings typically come with snap rings and cost anywhere from $8-$30. A bearing flange will run you $2-$3.
- Jack shafts: Jack shafts typically are sold for around $30-$40.